Internal convection (ht.conv_internal)¶
- ht.conv_internal.Morimoto_Hotta(Re, Pr, Dh, Rm)[source]¶
Calculates Nusselt number for flow inside a spiral heat exchanger of spiral mean diameter Rm and hydraulic diameter Dh according to [1], also as shown in [2] and [3].
\[Nu = 0.0239\left(1 + 5.54\frac{D_h}{R_m}\right)Re^{0.806}Pr^{0.268} \]\[D_h = \frac{2HS}{H+S} \]\[R_m = \frac{R_{min} + R_{max}}{2} \]- Parameters
- Refloat
Reynolds number with bulk properties, [-]
- Prfloat
Prandtl number with bulk properties [-]
- Dhfloat
Average hydraulic diameter, [m]
- Rmfloat
Average spiral radius, [m]
- Returns
- Nufloat
Nusselt number with respect to Dh, [-]
Notes
[1] is in Japanese.
References
- 1(1,2)
Morimoto, Eiji, and Kazuyuki Hotta. “Study of Geometric Structure and Heat Transfer Characteristics of Spiral Plate Heat Exchanger.” Transactions of the Japan Society of Mechanical Engineers Series B 52, no. 474 (1986): 926-33. doi:10.1299/kikaib.52.926.
- 2
Bidabadi, M. and Sadaghiani, A. and Azad, A. “Spiral heat exchanger optimization using genetic algorithm.” Transaction on Mechanical Engineering, International Journal of Science and Technology, vol. 20, no. 5 (2013): 1445-1454. http://www.scientiairanica.com/en/ManuscriptDetail?mid=47.
- 3
Turgut, Oğuz Emrah, and Mustafa Turhan Çoban. “Thermal Design of Spiral Heat Exchangers and Heat Pipes through Global Best Algorithm.” Heat and Mass Transfer, July 7, 2016, 1-18. doi:10.1007/s00231-016-1861-y.
Examples
>>> Morimoto_Hotta(1E5, 5.7, .05, .5) 634.4879473869859
- ht.conv_internal.Nu_conv_internal(Re, Pr, eD=0.0, Di=None, x=None, fd=None, Method=None)[source]¶
This function calculates the heat transfer coefficient for internal convection inside a circular pipe.
Requires at a minimum a flow’s Reynolds and Prandtl numbers Re and Pr. Relative roughness eD can be specified to include the enhancement of heat transfer from the added turbulence.
For laminar flow, thermally and hydraulically developing flow is supported with the pipe diameter Di and distance x is provided.
If no correlation’s name is provided as Method, the most accurate applicable correlation is selected.
If laminar, x and Di provided: ‘Baehr-Stephan laminar thermal/velocity entry’
Otherwise if laminar, no entry information provided: ‘Laminar - constant T’ (Nu = 3.66)
If turbulent and Pr < 0.03: ‘Martinelli’
If turbulent, x and Di provided: ‘Hausen’
Otherwise if turbulent: ‘Churchill-Zajic’
- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- eDfloat, optional
Relative roughness, [-]
- Difloat, optional
Inside diameter of pipe, [m]
- xfloat, optional
Length inside of pipe for calculation, [m]
- fdfloat, optoinal
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
- Other Parameters
- Methodstring, optional
A string of the function name to use, as in the dictionary vertical_cylinder_correlations
Examples
Turbulent example
>>> Nu_conv_internal(Re=1E5, Pr=.7) 183.71057902604906
Entry length - laminar example
>>> Nu_conv_internal(Re=1E2, Pr=.7, x=.01, Di=.1) 14.91799128769779
- ht.conv_internal.Nu_conv_internal_methods(Re, Pr, eD=0, Di=None, x=None, fd=None, check_ranges=True)[source]¶
This function returns a list of correlation names for the calculation of heat transfer coefficient for internal convection inside a circular pipe.
- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- eDfloat, optional
Relative roughness, [-]
- Difloat, optional
Inside diameter of pipe, [m]
- xfloat, optional
Length inside of pipe for calculation, [m]
- fdfloat, optoinal
Darcy friction factor [-]
- check_rangesbool, optional
Whether or not to return only correlations suitable for the provided data, [-]
- Returns
- methodslist
List of methods which can be used to calculate Nu with the given inputs
Examples
Turbulent example
>>> Nu_conv_internal_methods(Re=1E5, Pr=.7)[0] 'Churchill-Zajic'
Entry length - laminar example
>>> Nu_conv_internal_methods(Re=1E2, Pr=.7, x=.01, Di=.1)[0] 'Baehr-Stephan laminar thermal/velocity entry'
- ht.conv_internal.Nu_laminar_rectangular_Shan_London(a_r)[source]¶
Calculates internal convection Nusselt number for laminar flows in a rectangular pipe of varying aspect ratio, as developed in [1].
This model is derived assuming a constant wall heat flux from all sides. This is entirely theoretically derived and reproduced experimentally.
\[Nu_{lam} = 8.235\left(1 - 2.0421\alpha + 3.0853\alpha^2 - 2.4765\alpha^3 + 1.0578\alpha^4 - 0.1861\alpha^5\right) \]- Parameters
- a_rfloat
The aspect ratio of the channel, from 0 to 1 [-]
- Returns
- Nufloat
Nusselt number of flow in a rectangular channel, [-]
Notes
At an aspect ratio of 1 (square channel), the Nusselt number converges to 3.610224. The authors of [1] also published [2], which tabulates in their table 42 some less precise results that are used to check this function.
References
- 1(1,2)
Shah, R. K, and Alexander Louis London. Supplement 1: Laminar Flow Forced Convection in Ducts: A Source Book for Compact Heat Exchanger Analytical Data. New York: Academic Press, 1978.
- 2
Shah, Ramesh K., and A. L. London. “Laminar Flow Forced Convection Heat Transfer and Flow Friction in Straight and Curved Ducts - A Summary of Analytical Solutions.” STANFORD UNIV CA DEPT OF MECHANICAL ENGINEERING, STANFORD UNIV CA DEPT OF MECHANICAL ENGINEERING, November 1971. http://www.dtic.mil/docs/citations/AD0736260.
Examples
>>> Nu_laminar_rectangular_Shan_London(.7) 3.751762675455
- ht.conv_internal.helical_turbulent_Nu_Mori_Nakayama(Re, Pr, Di, Dc)[source]¶
Calculates Nusselt number for a fluid flowing inside a curved pipe such as a helical coil under turbulent conditions, using the method of Mori and Nakayama [1], also shown in [2] and [3].
For \(Pr < 1\):
\[Nu = \frac{Pr}{26.2(Pr^{2/3}-0.074)}Re^{0.8}\left(\frac{D_i}{D_c} \right)^{0.1}\left[1 + \frac{0.098}{\left[Re\left(\frac{D_i}{D_c} \right)^2\right]^{0.2}}\right] \]For \(Pr \ge 1\):
\[Nu = \frac{Pr^{0.4}}{41}Re^{5/6}\left(\frac{D_i}{D_c}\right)^{1/12} \left[1 + \frac{0.061}{\left[Re\left(\frac{D_i}{D_c}\right)^{2.5} \right]^{1/6}}\right] \]- Parameters
- Refloat
Reynolds number with D=Di, [-]
- Prfloat
Prandtl number with bulk properties [-]
- Difloat
Inner diameter of the coil, [m]
- Dcfloat
Diameter of the helix/coil measured from the center of the tube on one side to the center of the tube on the other side, [m]
- Returns
- Nufloat
Nusselt number with respect to Di, [-]
Notes
At very low curvatures, the predicted heat transfer coefficient grows unbounded.
Applicable for \(Re\left(\frac{D_i}{D_c}\right)^2 > 0.1\)
References
- 1
Mori, Yasuo, and Wataru Nakayama. “Study on Forced Convective Heat Transfer in Curved Pipes.” International Journal of Heat and Mass Transfer 10, no. 5 (May 1, 1967): 681-95. doi:10.1016/0017-9310(67)90113-5.
- 2
El-Genk, Mohamed S., and Timothy M. Schriener. “A Review and Correlations for Convection Heat Transfer and Pressure Losses in Toroidal and Helically Coiled Tubes.” Heat Transfer Engineering 0, no. 0 (June 7, 2016): 1-28. doi:10.1080/01457632.2016.1194693.
- 3
Hardik, B. K., P. K. Baburajan, and S. V. Prabhu. “Local Heat Transfer Coefficient in Helical Coils with Single Phase Flow.” International Journal of Heat and Mass Transfer 89 (October 2015): 522-38. doi:10.1016/j.ijheatmasstransfer.2015.05.069.
Examples
>>> helical_turbulent_Nu_Mori_Nakayama(2E5, 0.7, 0.01, .2) 496.2522480663327
- ht.conv_internal.helical_turbulent_Nu_Schmidt(Re, Pr, Di, Dc)[source]¶
Calculates Nusselt number for a fluid flowing inside a curved pipe such as a helical coil under turbulent conditions, using the method of Schmidt [1], also shown in [2], [3], and [4].
For \(Re_{crit} < Re < 2.2\times 10 ^4\):
\[Nu = 0.023\left[1 + 14.8\left(1 + \frac{D_i}{D_c}\right)\left( \frac{D_i}{D_c}\right)^{1/3}\right]Re^{0.8-0.22\left(\frac{D_i}{D_c} \right)^{0.1}}Pr^{1/3} \]For \(2.2\times 10^4 < Re < 1.5\times 10^5\):
\[Nu = 0.023\left[1 + 3.6\left(1 - \frac{D_i}{D_c}\right)\left(\frac{D_i} {D_c}\right)^{0.8}\right]Re^{0.8}Pr^{1/3} \]- Parameters
- Refloat
Reynolds number with D=Di, [-]
- Prfloat
Prandtl number with bulk properties [-]
- Difloat
Inner diameter of the coil, [m]
- Dcfloat
Diameter of the helix/coil measured from the center of the tube on one side to the center of the tube on the other side, [m]
- Returns
- Nufloat
Nusselt number with respect to Di, [-]
Notes
For very low curvatures, reasonable results are returned by both cases of Reynolds numbers.
References
- 1
Schmidt, Eckehard F. “Wärmeübergang Und Druckverlust in Rohrschlangen.” Chemie Ingenieur Technik 39, no. 13 (July 10, 1967): 781-89. doi:10.1002/cite.330391302.
- 2
El-Genk, Mohamed S., and Timothy M. Schriener. “A Review and Correlations for Convection Heat Transfer and Pressure Losses in Toroidal and Helically Coiled Tubes.” Heat Transfer Engineering 0, no. 0 (June 7, 2016): 1-28. doi:10.1080/01457632.2016.1194693.
- 3
Hardik, B. K., P. K. Baburajan, and S. V. Prabhu. “Local Heat Transfer Coefficient in Helical Coils with Single Phase Flow.” International Journal of Heat and Mass Transfer 89 (October 2015): 522-38. doi:10.1016/j.ijheatmasstransfer.2015.05.069.
- 4
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
Examples
>>> helical_turbulent_Nu_Schmidt(2E5, 0.7, 0.01, .2) 466.2569996832083
- ht.conv_internal.helical_turbulent_Nu_Xin_Ebadian(Re, Pr, Di, Dc)[source]¶
Calculates Nusselt number for a fluid flowing inside a curved pipe such as a helical coil under turbulent conditions, using the method of Xin and Ebadian [1], also shown in [2] and [3].
For \(Re_{crit} < Re < 1\times 10^5\):
\[Nu = 0.00619Re^{0.92} Pr^{0.4}\left[1 + 3.455\left(\frac{D_i}{D_c} \right)\right] \]- Parameters
- Refloat
Reynolds number with D=Di, [-]
- Prfloat
Prandtl number with bulk properties [-]
- Difloat
Inner diameter of the coil, [m]
- Dcfloat
Diameter of the helix/coil measured from the center of the tube on one side to the center of the tube on the other side, [m]
- Returns
- Nufloat
Nusselt number with respect to Di, [-]
Notes
For very low curvatures, reasonable results are returned.
The correlation was developed with data in the range of \(0.7 < Pr < 5; 0.0267 < \frac{D_i}{D_c} < 0.0884\).
References
- 1
Xin, R. C., and M. A. Ebadian. “The Effects of Prandtl Numbers on Local and Average Convective Heat Transfer Characteristics in Helical Pipes.” Journal of Heat Transfer 119, no. 3 (August 1, 1997): 467-73. doi:10.1115/1.2824120.
- 2
El-Genk, Mohamed S., and Timothy M. Schriener. “A Review and Correlations for Convection Heat Transfer and Pressure Losses in Toroidal and Helically Coiled Tubes.” Heat Transfer Engineering 0, no. 0 (June 7, 2016): 1-28. doi:10.1080/01457632.2016.1194693.
- 3
Hardik, B. K., P. K. Baburajan, and S. V. Prabhu. “Local Heat Transfer Coefficient in Helical Coils with Single Phase Flow.” International Journal of Heat and Mass Transfer 89 (October 2015): 522-38. doi:10.1016/j.ijheatmasstransfer.2015.05.069.
Examples
>>> helical_turbulent_Nu_Xin_Ebadian(2E5, 0.7, 0.01, .2) 474.11413424344755
- ht.conv_internal.laminar_Q_const()[source]¶
Returns internal convection Nusselt number for laminar flows in pipe according to [1], [2], and [3]. Heat flux is assumed constant. This is entirely theoretically derived and reproduced experimentally.
\[Nu = 4.354 \]- Returns
- Nufloat
Nusselt number, [-]
Notes
This applies only for fully thermally and hydraulically developed and flows. Many sources round to 4.36, but [3] does not.
References
- 1
Green, Don, and Robert Perry. Perry`s Chemical Engineers` Handbook, Eighth Edition. New York: McGraw-Hill Education, 2007.
- 2
Bergman, Theodore L., Adrienne S. Lavine, Frank P. Incropera, and David P. DeWitt. Introduction to Heat Transfer. 6E. Hoboken, NJ: Wiley, 2011.
- 3(1,2)
Gesellschaft, V. D. I., ed. VDI Heat Atlas. 2nd ed. 2010 edition. Berlin ; New York: Springer, 2010.
- ht.conv_internal.laminar_T_const()[source]¶
Returns internal convection Nusselt number for laminar flows in pipe according to [1], [2] and [3]. Wall temperature is assumed constant. This is entirely theoretically derived and reproduced experimentally.
\[Nu = 3.66 \]- Returns
- Nufloat
Nusselt number, [-]
Notes
This applies only for fully thermally and hydraulically developed and flows.
References
- 1
Green, Don, and Robert Perry. Perry`s Chemical Engineers` Handbook, Eighth Edition. New York: McGraw-Hill Education, 2007.
- 2
Bergman, Theodore L., Adrienne S. Lavine, Frank P. Incropera, and David P. DeWitt. Introduction to Heat Transfer. 6E. Hoboken, NJ: Wiley, 2011.
- 3
Gesellschaft, V. D. I., ed. VDI Heat Atlas. 2nd ed. 2010 edition. Berlin ; New York: Springer, 2010.
- ht.conv_internal.laminar_entry_Baehr_Stephan(Re, Pr, L, Di)[source]¶
Calculates average internal convection Nusselt number for laminar flows in pipe during the thermal and velocity entry region according to [1] as shown in [2].
\[Nu_D=\frac{\frac{3.657}{\tanh[2.264 Gz_D^{-1/3}+1.7Gz_D^{-2/3}]} +0.0499Gz_D\tanh(Gz_D^{-1})}{\tanh(2.432Pr^{1/6}Gz_D^{-1/6})} \]\[Gz = \frac{D}{L}Re_D Pr \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Lfloat
Length of pipe [m]
- Difloat
Diameter of pipe [m]
- Returns
- Nufloat
Nusselt number, [-]
Notes
As L gets larger, this equation becomes the constant-temperature Nusselt number.
References
- 1
Baehr, Hans Dieter, and Karl Stephan. Heat and Mass Transfer. Springer, 2013.
- 2
Bergman, Theodore L., Adrienne S. Lavine, Frank P. Incropera, and David P. DeWitt. Introduction to Heat Transfer. 6E. Hoboken, NJ: Wiley, 2011.
Examples
>>> laminar_entry_Baehr_Stephan(Re=100000, Pr=1.1, L=5, Di=.5) 72.65402046550976
- ht.conv_internal.laminar_entry_Seider_Tate(Re, Pr, L, Di, mu=None, mu_w=None)[source]¶
Calculates average internal convection Nusselt number for laminar flows in pipe during the thermal entry region as developed in [1], also shown in [2].
\[Nu_D=1.86\left(\frac{D}{L}Re_DPr\right)^{1/3}\left(\frac{\mu_b} {\mu_s}\right)^{0.14} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Lfloat
Length of pipe [m]
- Difloat
Diameter of pipe [m]
- mufloat, optional
Viscosity of fluid, [Pa*s]
- mu_wfloat, optional
Viscosity of fluid at wall temperature, [Pa*s]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Reynolds number should be less than 10000. This should be calculated using pipe diameter. Prandlt number should be no less than air and no more than liquid metals; 0.7 < Pr < 16700 Viscosities should be the bulk and surface properties; they are optional. Outside the boundaries, this equation is provides very false results.
References
- 1
Sieder, E. N., and G. E. Tate. “Heat Transfer and Pressure Drop of Liquids in Tubes.” Industrial & Engineering Chemistry 28, no. 12 (December 1, 1936): 1429-35. doi:10.1021/ie50324a027.
- 2
Serth, R. W., Process Heat Transfer: Principles, Applications and Rules of Thumb. 2E. Amsterdam: Academic Press, 2014.
Examples
>>> laminar_entry_Seider_Tate(Re=100000, Pr=1.1, L=5, Di=.5) 41.366029684589265
- ht.conv_internal.laminar_entry_thermal_Hausen(Re, Pr, L, Di)[source]¶
Calculates average internal convection Nusselt number for laminar flows in pipe during the thermal entry region according to [1] as shown in [2] and cited by [3].
\[Nu_D=3.66+\frac{0.0668\frac{D}{L}Re_{D}Pr}{1+0.04{(\frac{D}{L} Re_{D}Pr)}^{2/3}} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Lfloat
Length of pipe [m]
- Difloat
Diameter of pipe [m]
- Returns
- Nufloat
Nusselt number, [-]
Notes
If Pr >> 1, (5 is a common requirement) this equation also applies to flows with developing velocity profile. As L gets larger, this equation becomes the constant-temperature Nusselt number.
References
- 1
Hausen, H. Darstellung des Warmeuberganges in Rohren durch verallgeminerte Potenzbeziehungen, Z. Ver deutsch. Ing Beih. Verfahrenstech., 4, 91-98, 1943
- 2
W. M. Kays. 1953. Numerical Solutions for Laminar Flow Heat Transfer in Circular Tubes.
- 3
Bergman, Theodore L., Adrienne S. Lavine, Frank P. Incropera, and David P. DeWitt. Introduction to Heat Transfer. 6E. Hoboken, NJ: Wiley, 2011.
Examples
>>> laminar_entry_thermal_Hausen(Re=100000, Pr=1.1, L=5, Di=.5) 39.01352358988535
- ht.conv_internal.turbulent_Bhatti_Shah(Re, Pr, fd, eD)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as shown in [1]. The most widely used rough pipe turbulent correlation.
\[Nu_D = \frac{(f/8)Re_DPr}{1+\sqrt{f/8}(4.5Re_{\epsilon}^{0.2}Pr^{0.5}-8.48)} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- eDfloat
Relative roughness, [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
According to [1], the limits are: 0.5 ≤ Pr ≤ 10 0.002 ≤ ε/D ≤ 0.05 10,000 ≤ Re_{D} Another correlation is listed in this equation, with a wider variety of validity.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
M. S. Bhatti and R. K. Shah. Turbulent and transition flow convective heat transfer in ducts. In S. Kakaç, R. K. Shah, and W. Aung, editors, Handbook of Single-Phase Convective Heat Transfer, chapter 4. Wiley-Interscience, New York, 1987.
Examples
>>> turbulent_Bhatti_Shah(Re=1E5, Pr=1.2, fd=0.0185, eD=1E-3) 302.7037617414273
- ht.conv_internal.turbulent_Churchill_Zajic(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as developed in [1]. Has yet to obtain popularity.
\[Nu = \left\{\left(\frac{Pr_T}{Pr}\right)\frac{1}{Nu_{di}} + \left[1-\left(\frac{Pr_T}{Pr}\right)^{2/3}\right]\frac{1}{Nu_{D\infty}} \right\}^{-1} \]\[Nu_{di} = \frac{Re(f/8)}{1 + 145(8/f)^{-5/4}} \]\[Nu_{D\infty} = 0.07343Re\left(\frac{Pr}{Pr_T}\right)^{1/3}(f/8)^{0.5} \]\[Pr_T = 0.85 + \frac{0.015}{Pr} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
No restrictions on range. This is equation is developed with more theoretical work than others.
References
- 1
Churchill, Stuart W., and Stefan C. Zajic. “Prediction of Fully Developed Turbulent Convection with Minimal Explicit Empiricism.” AIChE Journal 48, no. 5 (May 1, 2002): 927-40. doi:10.1002/aic.690480503.
- 2
Plawsky, Joel L. Transport Phenomena Fundamentals, Third Edition. CRC Press, 2014.
Examples
>>> turbulent_Churchill_Zajic(Re=1E5, Pr=1.2, fd=0.0185) 260.5564907817961
- ht.conv_internal.turbulent_Colburn(Re, Pr)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1].
\[Nu = 0.023Re^{0.8}Pr^{1/3} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 0.5 < Pr < 3 and 10^4 < Re < 10^5.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Colburn, Allan P. “A Method of Correlating Forced Convection Heat-Transfer Data and a Comparison with Fluid Friction.” International Journal of Heat and Mass Transfer 7, no. 12 (December 1964): 1359-84. doi:10.1016/0017-9310(64)90125-5.
Examples
>>> turbulent_Colburn(Re=1E5, Pr=1.2) 244.41147091200068
- ht.conv_internal.turbulent_Dipprey_Sabersky(Re, Pr, fd, eD)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as shown in [1].
\[Nu = \frac{RePr(f/8)}{1 + (f/8)^{0.5}[5.19Re_\epsilon^{0.2} Pr^{0.44} - 8.48]} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- eDfloat
Relative roughness, [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
According to [1], the limits are: 1.2 ≤ Pr ≤ 5.94 and 1.4*10^4 ≤ Re ≤ 5E5 and 0.0024 ≤ eD ≤ 0.049.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Dipprey, D. F., and R. H. Sabersky. “Heat and Momentum Transfer in Smooth and Rough Tubes at Various Prandtl Numbers.” International Journal of Heat and Mass Transfer 6, no. 5 (May 1963): 329-53. doi:10.1016/0017-9310(63)90097-8
Examples
>>> turbulent_Dipprey_Sabersky(Re=1E5, Pr=1.2, fd=0.0185, eD=1E-3) 288.33365198566656
- ht.conv_internal.turbulent_Dittus_Boelter(Re, Pr, heating=True, revised=True)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [1], and [2], a reprint of [3].
\[Nu = m*Re_D^{4/5}Pr^n \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- heatingbool
Indicates if the process is heating or cooling, optional
- revisedbool
Indicates if revised coefficients should be used or not
- Returns
- Nufloat
Nusselt number, [-]
Notes
The revised coefficient is m = 0.023. The original form of Dittus-Boelter has a linear coefficient of 0.0243 for heating and 0.0265 for cooling. These are sometimes rounded to 0.024 and 0.026 respectively. The default, heating, provides n = 0.4. Cooling makes n 0.3.
0.6 ≤ Pr ≤ 160 Re_{D} ≥ 10000 L/D ≥ 10
References
- 1
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Dittus, F. W., and L. M. K. Boelter. “Heat Transfer in Automobile Radiators of the Tubular Type.” International Communications in Heat and Mass Transfer 12, no. 1 (January 1985): 3-22. doi:10.1016/0735-1933(85)90003-X
- 3
Dittus, F. W., and L. M. K. Boelter, University of California Publications in Engineering, Vol. 2, No. 13, pp. 443-461, October 17, 1930.
Examples
>>> turbulent_Dittus_Boelter(Re=1E5, Pr=1.2) 247.40036409449127 >>> turbulent_Dittus_Boelter(Re=1E5, Pr=1.2, heating=False) 242.9305927410295
- ht.conv_internal.turbulent_Drexel_McAdams(Re, Pr)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1].
\[Nu = 0.021Re^{0.8}Pr^{0.4} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is Pr ≤ 0.7 and 10^4 ≤ Re ≤ 5*10^6.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Drexel, Rober E., and William H. Mcadams. “Heat-Transfer Coefficients for Air Flowing in Round Tubes, in Rectangular Ducts, and around Finned Cylinders,” February 1, 1945. http://ntrs.nasa.gov/search.jsp?R=19930090924.
Examples
>>> turbulent_Drexel_McAdams(Re=1E5, Pr=0.6) 171.19055301724387
- ht.conv_internal.turbulent_ESDU(Re, Pr)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to the ESDU as shown in [1].
\[Nu = 0.0225Re^{0.795}Pr^{0.495}\exp(-0.0225\ln(Pr)^2) \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
4000 < Re < 1E6, 0.3 < Pr < 3000 and L/D > 60. This equation has not been checked. It was developed by a commercial group. This function is a small part of a much larger series of expressions accounting for many factors.
References
- 1
Hewitt, G. L. Shires, T. Reg Bott G. F., George L. Shires, and T. R. Bott. Process Heat Transfer. 1E. Boca Raton: CRC Press, 1994.
Examples
>>> turbulent_ESDU(Re=1E5, Pr=1.2) 232.3017143430645
- ht.conv_internal.turbulent_Friend_Metzner(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1].
\[Nu = \frac{(f/8)RePr}{1.2 + 11.8(f/8)^{0.5}(Pr-1)Pr^{-1/3}} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] 50 < Pr ≤ 600 and 5*10^4 ≤ Re ≤ 5*10^6. The extreme limits on range should be considered!
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Friend, W. L., and A. B. Metzner. “Turbulent Heat Transfer inside Tubes and the Analogy among Heat, Mass, and Momentum Transfer.” AIChE Journal 4, no. 4 (December 1, 1958): 393-402. doi:10.1002/aic.690040404.
Examples
>>> turbulent_Friend_Metzner(Re=1E5, Pr=100., fd=0.0185) 1738.3356262055322
- ht.conv_internal.turbulent_Gnielinski(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1]. This is the most recent general equation, and is strongly recommended.
\[Nu = \frac{(f/8)(Re-1000)Pr}{1+12.7(f/8)^{1/2}(Pr^{2/3}-1)} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 0.5 < Pr ≤ 2000 and 2300 ≤ Re ≤ 5*10^6.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Gnielinski, V. (1976). New Equation for Heat and Mass Transfer in Turbulent Pipe and Channel Flow, International Chemical Engineering, Vol. 16, pp. 359-368.
Examples
>>> turbulent_Gnielinski(Re=1E5, Pr=1.2, fd=0.0185) 254.62682749359632
- ht.conv_internal.turbulent_Gnielinski_smooth_1(Re, Pr)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1]. This is a simplified case assuming smooth pipe.
\[Nu = 0.0214(Re^{0.8}-100)Pr^{0.4} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 0.5 < Pr ≤ 1.5 and 10^4 ≤ Re ≤ 5*10^6.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Gnielinski, V. (1976). New Equation for Heat and Mass Transfer in Turbulent Pipe and Channel Flow, International Chemical Engineering, Vol. 16, pp. 359-368.
Examples
>>> turbulent_Gnielinski_smooth_1(Re=1E5, Pr=1.2) 227.88800494373442
- ht.conv_internal.turbulent_Gnielinski_smooth_2(Re, Pr)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1]. This is a simplified case assuming smooth pipe.
\[Nu = 0.012(Re^{0.87}-280)Pr^{0.4} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 1.5 < Pr ≤ 500 and 3*10^3 ≤ Re ≤ 10^6.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Gnielinski, V. (1976). New Equation for Heat and Mass Transfer in Turbulent Pipe and Channel Flow, International Chemical Engineering, Vol. 16, pp. 359-368.
Examples
>>> turbulent_Gnielinski_smooth_2(Re=1E5, Pr=7.) 577.7692524513449
- ht.conv_internal.turbulent_Gowen_Smith(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as shown in [1].
\[Nu = \frac{Re Pr (f/8)^{0.5}} {4.5 + [0.155(Re(f/8)^{0.5})^{0.54} + (8/f)^{0.5}]Pr^{0.5}} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
0.7 ≤ Pr ≤ 14.3 and 10^4 ≤ Re ≤ 5E4 and 0.0021 ≤ eD ≤ 0.095
References
- 1
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Gowen, R. A., and J. W. Smith. “Turbulent Heat Transfer from Smooth and Rough Surfaces.” International Journal of Heat and Mass Transfer 11, no. 11 (November 1968): 1657-74. doi:10.1016/0017-9310(68)90046-X.
Examples
>>> turbulent_Gowen_Smith(Re=1E5, Pr=1.2, fd=0.0185) 131.72530453824106
- ht.conv_internal.turbulent_Kawase_De(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as shown in [1].
\[Nu = 0.0471 RePr^{0.5}(f/4)^{0.5}(1.11 + 0.44Pr^{-1/3} - 0.7Pr^{-1/6}) \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
5.1 ≤ Pr ≤ 390 and 5000 ≤ Re ≤ 5E5 and 0.0024 ≤ eD ≤ 0.165.
References
- 1
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Kawase, Yoshinori, and Addie De. “Turbulent Heat and Mass Transfer in Newtonian and Dilute Polymer Solutions Flowing through Rough Pipes.” International Journal of Heat and Mass Transfer 27, no. 1 (January 1984): 140-42. doi:10.1016/0017-9310(84)90246-1.
Examples
>>> turbulent_Kawase_De(Re=1E5, Pr=1.2, fd=0.0185) 296.5019733271324
- ht.conv_internal.turbulent_Kawase_Ulbrecht(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as shown in [1].
\[Nu = 0.0523RePr^{0.5}(f/4)^{0.5} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
No limits are provided.
References
- 1
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Kawase, Yoshinori, and Jaromir J. Ulbrecht. “Turbulent Heat and Mass Transfer in Dilute Polymer Solutions.” Chemical Engineering Science 37, no. 7 (1982): 1039-46. doi:10.1016/0009-2509(82)80134-6.
Examples
>>> turbulent_Kawase_Ulbrecht(Re=1E5, Pr=1.2, fd=0.0185) 389.6262247333975
- ht.conv_internal.turbulent_Martinelli(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as shown in [1].
\[Nu = \frac{RePr(f/8)^{0.5}}{5[Pr + \ln(1+5Pr) + 0.5\ln(Re(f/8)^{0.5}/60)]} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
No range is given for this equation. Liquid metals are probably its only applicability.
References
- 1
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Martinelli, R. C. (1947). “Heat transfer to molten metals”. Trans. ASME, 69, 947-959.
Examples
>>> turbulent_Martinelli(Re=1E5, Pr=100., fd=0.0185) 887.1710686396347
- ht.conv_internal.turbulent_Nunner(Re, Pr, fd, fd_smooth)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as shown in [1].
\[Nu = \frac{RePr(f/8)}{1 + 1.5Re^{-1/8}Pr^{-1/6}[Pr(f/f_s)-1]} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- fd_smoothfloat
Darcy friction factor of a smooth pipe [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Valid for Pr ≅ 0.7; bad results for Pr > 1.
References
- 1
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
W. Nunner, “Warmeiibergang und Druckabfall in Rauhen Rohren,” VDI-Forschungsheft 445, ser. B,(22): 5-39, 1956
Examples
>>> turbulent_Nunner(Re=1E5, Pr=0.7, fd=0.0185, fd_smooth=0.005) 101.15841010919947
- ht.conv_internal.turbulent_Petukhov_Kirillov_Popov(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] and [3] as in [1].
\[Nu = \frac{(f/8)RePr}{C+12.7(f/8)^{1/2}(Pr^{2/3}-1)}\\ C = 1.07 + 900/Re - [0.63/(1+10Pr)] \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 0.5 < Pr ≤ 10^6 and 4000 ≤ Re ≤ 5*10^6
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
B. S. Petukhov, and V. V. Kirillov, “The Problem of Heat Exchange in the Turbulent Flow of Liquids in Tubes,” (Russian) Teploenergetika, (4): 63-68, 1958
- 3
B. S. Petukhov and V. N. Popov, “Theoretical Calculation of Heat Exchange in Turbulent Flow in Tubes of an Incompressible Fluidwith Variable Physical Properties,” High Temp., (111): 69-83, 1963.
Examples
>>> turbulent_Petukhov_Kirillov_Popov(Re=1E5, Pr=1.2, fd=0.0185) 250.11935088905105
- ht.conv_internal.turbulent_Prandtl(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1].
\[Nu = \frac{(f/8)RePr}{1 + 8.7(f/8)^{0.5}(Pr-1)} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] 0.5 ≤ Pr ≤ 5 and 10^4 ≤ Re ≤ 5*10^6
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
L. Prandt, Fuhrrer durch die Stomungslehre, Vieweg, Braunschweig, p. 359, 1944.
Examples
>>> turbulent_Prandtl(Re=1E5, Pr=1.2, fd=0.0185) 256.073339689557
- ht.conv_internal.turbulent_Sandall(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1].
\[Nu = \frac{(f/8)RePr}{12.48Pr^{2/3} - 7.853Pr^{1/3} + 3.613\ln Pr + 5.8 + C}\\ C = 2.78\ln((f/8)^{0.5} Re/45) \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 0.5< Pr ≤ 2000 and 10^4 ≤ Re ≤ 5*10^6.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Sandall, O. C., O. T. Hanna, and P. R. Mazet. “A New Theoretical Formula for Turbulent Heat and Mass Transfer with Gases or Liquids in Tube Flow.” The Canadian Journal of Chemical Engineering 58, no. 4 (August 1, 1980): 443-47. doi:10.1002/cjce.5450580404.
Examples
>>> turbulent_Sandall(Re=1E5, Pr=1.2, fd=0.0185) 229.0514352970239
- ht.conv_internal.turbulent_Sieder_Tate(Re, Pr, mu=None, mu_w=None)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [1] and supposedly [2].
\[Nu = 0.027Re^{4/5}Pr^{1/3}\left(\frac{\mu}{\mu_s}\right)^{0.14} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- mufloat
Viscosity of fluid, [Pa*s]
- mu_wfloat
Viscosity of fluid at wall temperature, [Pa*s]
- Returns
- Nufloat
Nusselt number, [-]
Notes
A linear coefficient of 0.023 is often listed with this equation. The source of the discrepancy is not known. The equation is not present in the original paper, but is nevertheless the source usually cited for it.
References
- 1
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Sieder, E. N., and G. E. Tate. “Heat Transfer and Pressure Drop of Liquids in Tubes.” Industrial & Engineering Chemistry 28, no. 12 (December 1, 1936): 1429-35. doi:10.1021/ie50324a027.
Examples
>>> turbulent_Sieder_Tate(Re=1E5, Pr=1.2) 286.9178136793052 >>> turbulent_Sieder_Tate(Re=1E5, Pr=1.2, mu=0.01, mu_w=0.067) 219.84016455766044
- ht.conv_internal.turbulent_Webb(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1].
\[Nu = \frac{(f/8)RePr}{1.07 + 9(f/8)^{0.5}(Pr-1)Pr^{1/4}} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 0.5 < Pr ≤ 100 and 10^4 ≤ Re ≤ 5*10^6
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
Webb, Dr R. L. “A Critical Evaluation of Analytical Solutions and Reynolds Analogy Equations for Turbulent Heat and Mass Transfer in Smooth Tubes.” Wärme - Und Stoffübertragung 4, no. 4 (December 1, 1971): 197-204. doi:10.1007/BF01002474.
Examples
>>> turbulent_Webb(Re=1E5, Pr=1.2, fd=0.0185) 239.10130376815872
- ht.conv_internal.turbulent_entry_Hausen(Re, Pr, Di, x)[source]¶
Calculates internal convection Nusselt number for the entry region of a turbulent flow in pipe according to [2] as in [1].
\[Nu = 0.037(Re^{0.75} - 180)Pr^{0.42}[1+(x/D)^{-2/3}] \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- Difloat
Inside diameter of pipe, [m]
- xfloat
Length inside of pipe for calculation, [m]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 0.7 < Pr ≤ 3 and 10^4 ≤ Re ≤ 5*10^6.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
H. Hausen, “Neue Gleichungen fÜr die Wärmeübertragung bei freier oder erzwungener Stromung,”Allg. Warmetchn., (9): 75-79, 1959.
Examples
>>> turbulent_entry_Hausen(Re=1E5, Pr=1.2, Di=0.154, x=0.05) 677.7228275901755
- ht.conv_internal.turbulent_von_Karman(Re, Pr, fd)[source]¶
Calculates internal convection Nusselt number for turbulent flows in pipe according to [2] as in [1].
\[Nu = \frac{(f/8)Re Pr}{1 + 5(f/8)^{0.5}\left[Pr-1+\ln\left(\frac{5Pr+1} {6}\right)\right]} \]- Parameters
- Refloat
Reynolds number, [-]
- Prfloat
Prandtl number, [-]
- fdfloat
Darcy friction factor [-]
- Returns
- Nufloat
Nusselt number, [-]
Notes
Range according to [1] is 0.5 ≤ Pr ≤ 3 and 10^4 ≤ Re ≤ 10^5.
References
- 1(1,2)
Rohsenow, Warren and James Hartnett and Young Cho. Handbook of Heat Transfer, 3E. New York: McGraw-Hill, 1998.
- 2
T. von Karman, “The Analogy Between Fluid Friction and Heat Transfer,” Trans. ASME, (61):705-710,1939.
Examples
>>> turbulent_von_Karman(Re=1E5, Pr=1.2, fd=0.0185) 255.7243541243272